S20
SILAGECUTTER B
for loader from 3,5 to 12tons lifting capacity
Description
The Silagecutter is designed for clean cut of all kinds of silage. The bendsave cutting shield cuts even extrem compressed silage.
Standard equipment
• Thick material main tube with welded cones
• With 2 hydraulic cylinders (max. hydraulic pressure 220 bar)
• Bend save grapple, Opening width ca. 1300mm
• Optional with waved or edged knife (screwed)
• High value full material heavy duty tines, 1000mm length, Sidetines with 50mm diameter (S XL)
IMPORTANT! The smallest possible working width must be 450mm wider than the width of the quick-coupling-frame of the loader!
Downloads
S20 Брошюра на русском языке
Product-Manual
Bressel S20 Spare part list
Bressel und Lade ET S20 Push off
Product-Manual
Bressel S20 Spare part list
Bressel und Lade ET S20 Push off
A PERFECT ATTACHMENT IN 3 STEPS
+
+
=





Type | Volume | Blockdim. | Tines | Weight | Part-No. | Request |
---|---|---|---|---|---|---|
B 157 | 1940 l | 157x130x95 cm | 12 | 1100 kg | S20 BA-41 | |
B 178 | 2200 l | 178x130x95 cm | 14 | 1190 kg | S20 BA-42 | |
B 199 | 2460 l | 199x130x95 cm | 16 | 1280 kg | S20 BA-43 | |
B 220 | 2720 l | 220x130x95 cm | 18 | 1370 kg | S20 BA-44 |

Tail hydraulic cat. II | AF-15 | |
Tail hydraulic cat. III | AF-18 | |
Wheelloader with Z-bar Kinematic | NE-59 | |
Wheel- or telescopic loader | NE-51 | |
Please indicate ALWAYS manufacturer and type of the loader on inquiries or orders! |

Free choice: Waved knife | FM-01 | |
Free choice: Edged knife | FM-02 | |
![]() | FA-02 | |
![]() | FA-03 | |
Hydraulic push-off wall (+ ca. 320kg, + 1x DA.) | AW-02 | |
Switch valve 12V / 90l (without cable and switch) | UV-02 | |
Switch valve 12V / 180l (without cable and switch) | UV-04 | |
Switch valve 24V / 180l (without cable and switch) | UV-07 | |
Lifting device 1000mm - (+ ca. 360kg, 1 x SA., +280 kg) | S01 HH-01 | |
Lifting device 2000mm - (+ ca. 440kg, 1 x SA., +440 kg) | S01 HH-02 | |
Pressure limiting valve (needed for pressures above 220 bar) | DB-01 | |
Pressure holding valve (needed for Bobcat, Dieci, Merlo, MF, aso.) | DH-01 |

Delivery FCA at factory Visselhövede (Transportcosts on request) |
Stand: 06/2024 | Our products are distributed by agriculture or building technic dealers | All prices + VAT.