S10
SILAGECUTTER A L
for loader from 1,5 to 6tons lifting capacity
Description
The Silagecutter is designed for clean cut of all kinds of silage. The bendsave cutting shield cuts even extrem compressed silage.
Standard equipment
• Thick material main tube with welded cones
• High value full material tines, 800mm length
• Sidetines with 50mm diameter (S XL)
• Type AL 157 and 178: cranked tines, 2 hydraulic cylinders
• Type AL 199 to 241: HD-tines, 3 hydraulic cylinders, middle knife
• Bend save grapple
(max. hydraulic pressure 220 bar)
• Opening width ca. 800mm
• Optional with waved or edged knife (screwed)
Downloads
Product-Manual
Spare parts S10 1570-1780mm (>2013)
Spare parts S10 2410mm (<2012)
Spare parts S10 2200mm (<2012)
Spare parts S10 1990mm (<2012)
Spare parts S10 1780mm (<2012)
Spare parts S10 1990-2410mm (>2013)
Spare parts S10 1570mm (<2012)
Spare parts S10 1570-1780mm (>2013)
Spare parts S10 2410mm (<2012)
Spare parts S10 2200mm (<2012)
Spare parts S10 1990mm (<2012)
Spare parts S10 1780mm (<2012)
Spare parts S10 1990-2410mm (>2013)
Spare parts S10 1570mm (<2012)
A PERFECT ATTACHMENT IN 3 STEPS
+
+
=





Type | Volume | Blockdim. | Tines | Weight | Part-No. | Request |
---|---|---|---|---|---|---|
A L 157 | 1065 l | 157x80x80 cm | 12 | 720 kg | S10 BA-41 | |
A L 178 | 1210 l | 178x80x80 cm | 14 | 750 kg | S10 BA-42 | |
A L 199 | 1350 l | 199x80x80 cm | 16 | 1025 kg | S10 BA-43 | |
A L 220 | 1495 l | 220x80x80 cm | 18 | 1060 kg | S10 BA-44 | |
A L 241 | 1640 l | 241x80x80 cm | 20 | 1095 kg | S10 BA-45 |

Euro-System | AF-M4 | |
Frontloader without Euro-coupling system | NE-02 | |
Wheelloader with Z-bar Kinematic | NE-59 | |
All other wheel- or telescopic loader | NE-51 | |
Please indicate ALWAYS manufacturer and type of the loader on inquiries or orders! |

Free choice: Waved knife | FM-01 | |
Free choice: Edged knife | FM-02 | |
![]() | FA-02 | |
![]() | FA-03 | |
![]() | FA-10 | |
![]() | FA-07 | |
Heavy duty tines for type A L 157 (+25kg) | N8-11 7 | |
Heavy duty tines for type A L 178 (+30kg) | N8-11 8 | |
Hydraulic push-off wall for types A L 157 and 178 (+180kg, +1xDA) | AW-02s | |
Hydraulic push-off wall for types A L 199 to 241 (+230kg, +1xDA) | AW-02b | |
Switch valve 12V / 90l (without cable and switch) | UV-02 | |
Pressure limiting valve (needed for pressures above 220 bar) | DB-01 | |
Pressure holding valve (needed for Bobcat, Dieci, Merlo, MF, aso.) | DH-01 |

Delivery FCA at factory Visselhövede (Transportcosts on request) |
Stand: 06/2024 | Our products are distributed by agriculture or building technic dealers | All prices + VAT.