Bressel und Lade Maschinenbau GmbH
Hauptstr. 21, Ortsteil Schwitschen, D-27374 Visselhövede Tel.: 0049 (0)4262/9547-0, Fax: 0049 (0)4262/9547-70 Mail: info@bressel-lade.de  |
 |
Bressel und Lade Maschinenbau GmbH
Hauptstr. 21, Ortsteil Schwitschen, D-27374 Visselhövede Tel.: 0049 (0)4262/9547-0, Fax: 0049 (0)4262/9547-70 Mail: info@bressel-lade.de |
|
Products |
Attachments for Wheel loader, Telescopic loader |
Type B199 -waved knife
Pic. 623 |
Silagecutter type B |
| for wheel and telescopic loaders |
 Starting from above: Waved, edged and smooth knife |
 |
The Silagecutter is designed for clean silage cutting of each kind in agriculture range.
- For wheel- and telescopic loader
- Thick material main tube with welded cones
- High value full material heavy duty tines, 1000mm length
- 90l/min oil flow divider
- Opening width ca. 1300mm
- Optional with waved, edged or smooth knife (screwed)
- Max. hydraulic pressure 220 bar
| Type | Volume | Blockdimensions | Weight | Cylinders |
| B157 | ca. 1940 l | 157x130x95cm | ca. 1100 kg | 2 |
| B178 | ca. 2200 l | 178x130x95cm | ca. 1260 kg | 2 |
| B199 | ca. 2460 l | 199x130x95cm | ca. 1350 kg | 2 |
|
||||
| Additional: | ||||
| Model with hydr. push off wall B157 (+1 x DA needed, ca. 300kg) | ||||
| Model with hydr. push off wall B178 (+1 x DA needed, ca. 320kg) | ||||
| Model with hydr. push off wall B199 (+1 x DA needed, ca. 340kg) | ||||
| Model with switch valve 12V/90l in connection with push off wall | ||||
| Model with switch valve 12V/120l in connection with push off wall | ||||
| Model with switch valve 12V/180l in connection with push off wall | ||||
| Model above switch valve with 24V magnet | ||||
| Model with 150 l/min oil flow divider | ||||
| Model with 200 l/min oil flow divider | ||||
| Model with pressure holding valve (needed for as example Bobcat, Dieci, Faresin, Merlo, MF) | ||||
| Model with pressure limiting valve (adjusted to 220 bar) |