Products

Attachments for Wheel loader, Telescopic loader

previous next

back

Printversion [PDF]

Type B199 -waved knife

Pic. 623	Silagecutter
	type B

Further information:

Examples of usage Video of usage

Standard equipment:

- For wheel- and telescopic loader
- Thick material main tube with welded cones
- High value full material heavy duty tines, 1000mm length
- 90l/min oil flow divider
- Opening width ca. 1300mm
- Optional with waved, edged or smooth knife (screwed)
- Max. hydraulic pressure 220 bar

Type	Volume	Blockdimensions	Weight	Cylinders
B157	ca. 1940 l	157x130x95cm	ca. 1100 kg	2
B178	ca. 2200 l	178x130x95cm	ca. 1260 kg	2
B199	ca. 2460 l	199x130x95cm	ca. 1350 kg	2
B241	ca. 2950 l	241x130x95cm	ca. 2200 kg	4
B262	ca. 3250 l	262x130x95cm	ca. 2450 kg	4

Additional:
Model with hydr. push off wall B157 (+1 x DA needed, ca. 300kg)
Model with hydr. push off wall B178 (+1 x DA needed, ca. 320kg)
Model with hydr. push off wall B199 (+1 x DA needed, ca. 340kg)
Model with hydr. push off wall B241 and B262 (+1 x DA needed, ca. 400kg)
Model with switch valve 12V/90l in connection with push off wall
Model with switch valve 12V/120l in connection with push off wall
Model with switch valve 12V/180l in connection with push off wall
Model above switch valve with 24V magnet
Model with 150 l/min oil flow divider
Model with 200 l/min oil flow divider
Model with pressure holding valve (needed for as example Bobcat, Dieci, Faresin, Merlo, MF)
Model with pressure limiting valve (adjusted to 220 bar)