Products

Attachments for Wheel loader, Telescopic loader

previous next

back

Printversion [PDF]

Special equipment: Heavy duty tines

Pic. 621	Silagecutter
	type A

Further information:

Examples of usage Video of usage

Standard equipment:

- For wheel- and telescopic loader
- Thick material main tube welded cones
- High value full material tines, 800mm length
- 90l/min oil flow divider
- For 1780mm and above generally with middle knife
- With latticed back part
- Optional with waved, edged or smooth knife (screwed)
- Opening width ca. 850mm
- Max. hydraulic pressure 220 bar

Type	Volume	Blockdimensions	Weight	Cylinders
A157	ca. 1000 l	157x80x75cm	ca. 705 kg	2
A178	ca. 1130 l	178x80x75cm	ca. 910 kg	3
A199	ca. 1270 l	199x80x75cm	ca. 970 kg	4
A220	ca. 1400 l	220x80x75cm	ca. 1045 kg	4
A241	ca. 1540 l	241x80x75cm	ca. 1080 kg	4

Additional:
Model with heavy duty tines for Typ A157 and A178
Model with heavy duty tines for Typ A199
Model with heavy duty tines for Typ A220
Model with heavy duty tines for Typ A241
Model with bucket for A157
Model with bucket for A178
Model with bucket for A199
Model with bucket for A220
Model with bucket for A241
Model with hydr. push off wall for Typ A157 (+1 x DW needed)
Model with hydr. push off wall for Typ A178 and above (+1 x DA needed)
Model with switch valve 12V/90l in connection with hydraulic push off wall
Model with switch valve 12V/120l in connection with hydraulic push off wall
Model above switch valve with 24V magnet
Model with 150 l/min oil flow divider
Model with pressure holding valve (needed for as example Bobcat, Dieci, Faresin, Merlo, MF)
Model with pressure limiting valve (adjusted to 220 bar)