Bressel und Lade Maschinenbau GmbH
Hauptstr. 21, Ortsteil Schwitschen, D-27374 Visselhövede Tel.: 0049 (0)4262/9547-0, Fax: 0049 (0)4262/9547-70 Mail: info@bressel-lade.de  |
 |
Bressel und Lade Maschinenbau GmbH
Hauptstr. 21, Ortsteil Schwitschen, D-27374 Visselhövede Tel.: 0049 (0)4262/9547-0, Fax: 0049 (0)4262/9547-70 Mail: info@bressel-lade.de |
|
Products |
Attachments for Wheel loader, Telescopic loader |
Pic. 617 |
Silagebucket type AS |
| for wheel and telescopic loaders |
 Special equipment: 2 tines at every side |
 Driving to the stock |
The Silagebucket is designed for collection and transportation of chopped silage of each kind in agriculture range.
- For wheel- and telescopic loader
- With highwear resistant cutting edge (150x20mm)
- With strong substructure
- Bucket height 700mm, bucket depth 800mm
- With 1 respectively 2 sickle reinforcements
- With 2 hydraulic cylinders (Max. hydraulic pressure 220 bar)
- Opening width ca. 1050mm
- Thick material main tube with welded cones (twist protected)
- With additional cones in the grapple for individual adjustment to different types of silage
- Length of tines 600mm / optional with 800mm length
- With 1 tine 600mm at every side
Special designed attachments are deliverable on request !
| Width | Volume | Weight | Tines |
| 1600 mm | ca. 910 l | ca. 670 kg | 7 |
| 1800 mm | ca. 1030 l | ca. 700 kg | 8 |
| 2000 mm | ca. 1150 l | ca. 730 kg | 9 |
| 2200 mm | ca. 1260 l | ca. 760 kg | 10 |
| 2400 mm | ca. 1380 l | ca. 790 kg | 10 |
| 2600 mm | ca. 1500 l | ca. 820 kg | 12 |
| 2800 mm | ca. 1620 l | ca. 850 kg | 13 |
|
|||
| Additional: | |||
| Model with 1 tine 600mm at every side | |||
| Model with raised sideparts (convex form, screwed) | |||
| Model with high wear res. substruc. and cutting edge (200x20mm, 500HB) | per m. | ||
| Model with high wear res. substruc. & screwed knife (dbl. beveled, 500HB) | per m. | ||
| Model with high tip function (+ 350kg, + 1x DA needed) | |||
| Model with switch valve 12V / 90l in connection with high tip function | |||
| Model with pressure holding valve (needed for as example Bobcat, Dieci, Faresin, Merlo, MF) | |||
| Model with pressure limiting valve (adjusted to 220 bar) | |||