Bressel und Lade Maschinenbau GmbH
Hauptstr. 21, Ortsteil Schwitschen, D-27374 Visselhövede Tel.: 0049 (0)4262/9547-0, Fax: 0049 (0)4262/9547-70 Mail: info@bressel-lade.de  |
 |
Bressel und Lade Maschinenbau GmbH
Hauptstr. 21, Ortsteil Schwitschen, D-27374 Visselhövede Tel.: 0049 (0)4262/9547-0, Fax: 0049 (0)4262/9547-70 Mail: info@bressel-lade.de |
|
Products |
Attachments for Wheel loader, Telescopic loader |
Pic. 616 |
Silagebucket type S |
| for wheel and telescopic loaders |
 Special equipment: Screwed knife |
 |
The Silagebucket is designed for collection and transportation of silage of each kind in agriculture range.
- For wheel- and telescopic loader
- With 2 hydraulic cylinders (Max. hydraulic pressure 220 bar)
- With 1 respectively 2 sickle reinforcement
- With highwear resistant cutting edge (150x20mm, 500HB)
- With strong substructure
- Bucket height 650mm, bucket depth 850mm
- Opening width ca. 1250mm
Special designed attachments are deliverable on request !
IMPORTANT: Please be informed that the opened grapple in back rolled position may
crash with the lifting arm of the carrier vehicle (especially wheelloader with Z-kinematics).
For these damages we won’t take any liability!
| Width | Volume | Sickle tines | Bearings | Weight |
| 1650 mm | ca. 840 l | 4 | 2 | ca. 595 kg |
| 1800 mm | ca. 925 l | 5 | 2 | ca. 620 kg |
| 2000 mm | ca. 1040 l | 5 | 2 | ca. 670 kg |
| 2200 mm | ca. 1140 l | 6 | 4 | ca. 705 kg |
| 2400 mm | ca. 1250 l | 6 | 4 | ca. 750 kg |
| 2600 mm | ca. 1350 l | 7 | 4 | ca. 795 kg |
| 2800 mm | ca. 1440 l | 7 | 4 | ca. 840 kg |
|
||||
| Additional: | ||||
| Model with removable sideparts (screwed) | ||||
| Model with raised sideparts (screwed) | ||||
| Model with high wear res. substruc. and cutting edge (200x20mm, 500HB) | per m. | |||
| Model with high wear res. substruc. & screwed knife (dbl. beveled, 500HB) | per m. | |||
| Model with high tip function (+ 350kg, + 1x DA needed) | ||||
| Model with switch valve 12V / 90l in connection with high tip function | ||||
| Model with pressure holding valve (needed for as example Bobcat, Dieci, Faresin, Merlo, MF) | ||||
| Model with pressure limiting valve (adjusted to 220 bar)2 | ||||