Bressel und Lade Maschinenbau GmbH
Hauptstr. 21, Ortsteil Schwitschen, D-27374 Visselhövede Tel.: 0049 (0)4262/9547-0, Fax: 0049 (0)4262/9547-70 Mail: info@bressel-lade.de  |
 |
Bressel und Lade Maschinenbau GmbH
Hauptstr. 21, Ortsteil Schwitschen, D-27374 Visselhövede Tel.: 0049 (0)4262/9547-0, Fax: 0049 (0)4262/9547-70 Mail: info@bressel-lade.de |
|
Products |
Attachments for Wheel loader, Telescopic loader |
Pic. 606 |
Bucket with grapple |
| for wheel and telescopic loaders |
 Opened |
The bucket with grapple is heavy duty designed for loading manure. By removing the screwed sideparts it is easier to load heavy manure.
- For wheel- and telescopic loader
- With highwear resistant cutting edge (150x20mm, 500HB)
- With strong substructure
- Bucket height 800mm, bucket depth 1000mm
- With 1 respec. 2 sickle reinforcements
- With removable sideparts (screwed)
- With 2 hydraulic cylinders (Max. hydraulic pressure 220 bar)
- Opening width ca. 1450mm
- Thick material main tube with welded cones
- Twist protected tines with 800mm length in the grapple
Special designed attachments are deliverable on request.
| Width | Volume | Weight | Tines |
| 1600 mm | ca. 1130 l | ca. 690 kg | 7 |
| 1800 mm | ca. 1280 l | ca. 730 kg | 8 |
| 2000 mm | ca. 1420 l | ca. 770 kg | 9 |
| 2200 mm | ca. 1560 l | ca. 810 kg | 10 |
| 2400 mm | ca. 1700 l | ca. 850 kg | 10 |
|
|||
| Additional: | |||
| Model with 1 bowed tine 600mm at every side | |||
| Model with high wear res. substruc. and cutting edge (200x20mm, 500HB) | per m. | ||
| Model with high wear res. substruc. & screwed knife (dbl. beveled, 500HB) | per m. | ||
| Model with pressure holding valve (needed for as example Bobcat, Dieci, Faresin, Merlo, MF) | |||
| Model with pressure limiting valve (adjusted to 220 bar) | |||