Bressel und Lade Maschinenbau GmbH
Hauptstr. 21, Ortsteil Schwitschen, D-27374 Visselhövede Tel.: 0049 (0)4262/9547-0, Fax: 0049 (0)4262/9547-70 Mail: info@bressel-lade.de  |
 |
Bressel und Lade Maschinenbau GmbH
Hauptstr. 21, Ortsteil Schwitschen, D-27374 Visselhövede Tel.: 0049 (0)4262/9547-0, Fax: 0049 (0)4262/9547-70 Mail: info@bressel-lade.de |
|
Products |
Attachments for Wheel loader, Telescopic loader |
Pic. 604 |
Silage fork with grapple |
| for wheel and telescopic loaders |
 Opened |
 Transport of square bales |
- For wheel- and telescopic loader
- Thick material main tubes with welded cones
- High value full material tines, 1000mm length
- Twist protected tines in the grapplee
- With 2 hydraulic cylinders (Max. hydraulic pressure 220 bar)
- Opening width ca. 1300mm
Special designed attachments are deliverable on request !
| Width | Volume | Weight | Tines |
| Model with heavy duty tines | |||
| 1700 mm | ca. 1700 l | ca. 560 kg | 9 |
| 1900 mm | ca. 1900 l | ca. 590 kg | 10 |
| 2100 mm | ca. 2100 l | ca. 620 kg | 11 |
| 2300 mm | ca. 2300 l | ca. 650 kg | 12 |
| 2500 mm | ca. 2500 l | ca. 680 kg | 13 |
| Model with normal load tines | |||
| 1700 mm | ca. 1700 l | ca. 530 kg | 9 |
| 1900 mm | ca. 1900 l | ca. 560 kg | 10 |
| 2100 mm | ca. 2100 l | ca. 585 kg | 11 |
| 2300 mm | ca. 2300 l | ca. 610 kg | 12 |
| 2500 mm | ca. 2500 l | ca. 640 kg | 13 |
|
|||
| Additional: | |||
| Model with 1 bowed tine 600mm at every side | |||
| Model with hydr. push off wall till 1900mm width (+1 x DA needed) | |||
| Model with hydr. push off wall über 1900mm width (+1 x DA needed) | |||
| Model with switch valve 12V / 90l in connection with push off wall | |||
| Model with switch valve 12V / 120l in connection with push off wall | |||
| Model with automatic switch valve | |||
| Model with pressure holding valve (needed for as example Bobcat, Dieci, Faresin, Merlo, MF) | |||
| Model with pressure limiting valve (adjusted to 220 bar) |